 |
THE
ART & CREATIVE
MATERIALS INSTITUTE, INC.
1280 Main St., 2nd Fl.,
P.O. Box 479, Hanson, MA 02341 USA
Tel. (781) 293-4100 Fax (781) 294-0808
Web Address: www.acminet.org
Deborah
M. Fanning, CAE
Executive Vice President
Deborah S. Gustafson
Associate Director
FOR
IMMEDIATE RELEASE
July 30, 2002
|
PHTHALATES
IN ACMI-CERTIFIED POLYMER CLAYS
Polymer
clays in the ACMI certification program were re-evaluated in October
2000 and continue to receive ACMI's non-toxic designation, said
Deborah Fanning, Executive Vice President of The Art & Creative
Materials Institute, Inc. (ACMI). This re-evaluation took place
at the request of the polymer clay manufacturers because of questions
raised at that time about phthalates in toys.
ACMI
members do use phthalates in polymer clays but these phthalate esters
do not present acute or chronic toxicity concerns. ACMI's consulting
toxicological team at Duke University Medical Center (DUKE) has
eval-uated these polymer clays for acute and chronic hazards by
all potential routes of exposure and have found none.
Woodhall
Stopford, M.D., principal toxicologist of the ACMI Certification
Program, stated that "Phthalate esters found in these polymer clays
offer little or no acute toxicity concerns and are not a chronic
hazard concern even assuming a large (24 mg) daily ingestion of
these clays. Dr. Stopford's risk assessment, as well as an executive
summary, are available on the DUKE website at http://duketox.mc.duke.edu.
Simply click on "Recent Toxicological Issues" on the home page and
then polymerclays1.doc for the risk assessment or polymerclaysummary.doc
for the executive summary.
| LOOK
FOR THESE SEALS... |
 |
The
Consumer Product Safety Commission (CPSC) has extensively tested
samples of polymer clay for safety concerns. They found that the
polymer clay tested did not contain any volatile organic compounds
and that no acid gases were released if the clay was baked to 163o
C (325o F). They found that hydrogen gas was released only if the
clay was heated to the point of turning black, 180o C (356o F).
Thus, you would need to destroy the clay product in the oven-heating
process to release hydrogen gas, and <0.1% of the phthalate esters
would be released with no breakdown of the polyvinyl chloride.
Mrs.
Fanning said that ACMI would welcome another review of the issue
by CPSC. As recently as last year, a CPSC Chronic Hazard Advisory
Panel concluded that DINP, a phthalate, presented "an extremely
low or non-existent" risk to reproductive and developmental processes
in humans due to DINP exposure. And, she noted, the U.S. Food and
Drug Administration in an April 19, 2001 fact sheet stated, "FDA
believes that at the present time there is no reason for consumers
to be alarmed at the use of cosmetics containing phthalates," although
the agency continues to study the issue.
It is not possible on such short notice to address the specific
test results described in a USPIRG report issued today, but the
inhalation report is clearly not in accord with that conducted by
Dr. Stopford. Nor has there been time to address in detail the inaccuracies
in the report about ACMI's certification program and the independent
evaluation of health risks conducted by the consulting toxicological
team at DUKE.
No
hazardous level of any ingredient is permitted in any art material
product evaluated as non-toxic in the ACMI program, whether a children's
or an adult's product. ACMI's toxicological team takes into account
the metabolism and size of a small child when evaluating materials
that will be used by children. Thus, even children can use polymer
clays that are evaluated as non-toxic in the ACMI program; however,
supervision in the oven-baking process is recommended for very young
children. Parents, educators and others are urged to read the labels
on polymer clays and other art products to better understand which
have been evaluated by ACMI and which are non-toxic. Some art materials
meant for adults may need special handling as indicated in the safe-use
instructions on the labels.
Since the enactment of the Federal Labeling of Hazardous Art Materials
Act in 1988, currently administered by CPSC, not one ACMI-certified
product has had to be recalled by its member companies. Mrs. Fanning
noted, "We believe this is an extraordinary record of the effectiveness
of the ACMI's certification program in protecting children and other
consumers."
***************************************************************************************
The
Art & Creative Materials Institute, Inc. is an international association,
composed of a diverse and involved membership, and is recognized
as the leading authority on art and craft materials. ACMI's members
are art and craft material manufacturers, and currently there are
over 210 members. Since its inception, ACMI's certification program
has certified that products in the program are either non-toxic
or appropriately labeled with any cautionary language and safe use
instructions. Of the 60,000 art materials in the program, 100% of
the children's products and 85% of those meant for the adult artist
are certified as non-toxic. This certification program has received
the endorsement of experts in the field of toxicology and is one
of the finest industry programs in existence. ACMI seeks to create
and maintain a positive environment for art and craft materials
usage; to promote safety in art and craft materials; and to serve
as an information and service resource on art and craft materials.
Press kits are available from ACMI.
|